Skip to main content
Jenn-Air

Drawer Dragging on Floor Covering When Opening and Closing

Possible Solutions

Is the toe guard too long?

If the toe guard is rubbing on the floor covering, the toe guard clearance may be changed as follows:

  1. Mark on each side of the toe guard the amount of toe guard that rubs the floor covering.
  2. Remove the drawer from the compactor. Refer to "Cleaning Inside the Cabinet" in your Use and Care Guide.
  3. Use a ruler and a pencil or chalk to draw a line between the marks on each side of the toe guard.
  4. Use scissors or a utility knife to cut the toe guard along the line.
  5. Replace the drawer. if the toe guard still rubs the floor covering, repeat steps 1-4.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

 

Still need help?

In the event you need service, please call 1-800-JENN-AIR (536-6247) to arrange for an authorized servicer to perform repairs.

 

  • Was this article helpful?