Error Code Not Listed - Induction Cooktop

Is the power level set correctly?  

 At the time of purchase, the cooktop is set to the maximum possible power. Adjust the setting in relation to the limits of the electrical system in your home as described in the following paragraph.

NOTE: Depending on the power selected for the cooktop, some of the cooking zone power levels and functions (e.g. boil or quick reheating) could be automatically limited, in order to prevent the selected limit from being exceeded.

To set the power of the cooktop: Once you have connected the device to the mains power supply, you can set the power level within 60 seconds.

Press the timer “+” button for at least 5 seconds. The display shows .

Press the “OK” button until the last power level selected appears. Use the “+” and “−” buttons to select the desired power level. The power levels available are:4.0 kW – 6.0 kW – 7.2 kW.

Confirm by pressing “OK”.

The power level selected will stay in the memory even if the power supply is interrupted.

To change the power level, turn your wall breaker power to the cooktop off for at least 60 seconds, then turn the power back on and repeat the steps above.

If an error occurs during the setting sequence, the  symbol will appear, and you will hear a beep. If this happens, repeat the operation. If the error persists, contact the After-Sales Service