Removing and Replacing the Oven Door
Guide to Removing the Jenn-Air Oven Door for Cleaning
It’s important to know how to replace the door without harming the rest of the appliance.
There are two door types: with hinge latches and without hinge latches.
To Remove Jenn-Air Oven Doors with Hinge Latches
- Before removing the oven door, prepare a flat surface to place the oven door. It should be covered with a soft blanket, or use posts from packing material.
- Open the oven door.
- Locate oven door hinge locks/latches in both corners of the oven door.
- Rotate/flip up the hinge lock/latch toward the oven door to the unlocked position.
- If the door hinge lock/latch is not rotated/flipped fully, the door will not be removed properly.
- Partially close the door to engage the door latch locks. The door will stop at this point.
- Using two hands, grasp the edges of the oven door. Lift and pull the door toward you and remove it. The door may need to be gently shifted from side to side as you pull it.
- Set oven door(s) aside on the prepared covered work surface, with the oven door resting on its handle.
How to Replace a Jenn-Air Oven Door with Hinge Latches
- Using two hands, grasp the side edges of the door at the midpoint. Face oven cavity.
- Locate slots on each side of the oven cavity for door hinge locks.
- At a 45° angle, align door hinges with slots in the lower front of the oven cavity. Slowly insert the door while maintaining a 45° angle. The door is engaged in the slot when you feel a slight drop.
- Lower oven door to fully open position: If the door does not open to full 90°, repeat steps 1 - 3.
- Locate the oven door hinge locks/latches in the corners of the oven door and rotate the hinge locks/latches toward the oven cavity to the locked position.
- Close the oven door.
- When hinges are properly installed, and the door is closed, there should be an even gap between the door and the control panel: If one side of the oven door is hanging lower than the other side, the hinge on that side is not properly installed.
- Repeat the steps to remove and replace the oven door.
To Remove Jenn-Air Oven Door without Hinge Latches
- Before removing the oven door, prepare a flat surface to place the oven door. It should be covered with a soft blanket, or posts from packing material.
- Open the oven door to the first stop position (opened about 4" [10.0 cm]).
- Grasp the door at each side. Do not use the door handle to lift the door.
- Evenly lift the door until it clears the hinge arms.
To Replace Jenn-Air Oven Door without Hinge Latches
- Grasp the door at each side.
- Align slots in the door with the hinge arms on the range.
- Slide the door down onto the hinge arms until the door is completely seated on the hinges.
- Push down on the top corners of the door to seat the door completely on hinges.
NOTE: The door should not appear crooked.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.