F9 or F9 E0 - Wall Oven

Was the product installed correctly? 

This code will most often indicate that the appliance is wired incorrectly at the home electrical supply, or at the hard wire connection. Ensure that all terminals are wired correctly and that the L2 and N are not swapped.  Contact a qualified electrician to verify the electrical supply was installed correctly.

Reset power to the product:

During a power outage, if there was an unexpected amount of power supply line "noise" that the control detected as an incorrect voltage amount, the control could display the F9, F9 E0 or PF Error Code.  Also, if any keys were pressed before the 10-second delay interval on power-up, this could cause the F9, F9 E0 or PF to appear.

• Power unit down by turning off the circuit breaker(s) for one (1) minute.
• Power unit up by turning on the circuit breaker(s).
• Monitor the oven for one (1) minute to ensure the error code does not display again.
• Verify oven operation.