Nothing Is Working - No Power - Wall Oven

Is the oven control set correctly?

Refer to your Owner's Manual for more information.

Is the Control Lock On?

To unlock:

• Press and hold START (on single oven) or the lower START (on double ovens) for 3 seconds to unlock 
• No keypads will function with the controls locked.

Refer to your Owner's Manual for more information on Control Lock.

Does the Wall Oven have the correct amperage?

If the wall oven does not have the proper amperage, the heating element may not turn on. 

• The oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate, which is located on the right mounting rail. 
• Models rated from 7.3 to 9.6 kW at 240 volts (5.5 to 7.2 kW at 208 volts) require a separate 40-amp circuit. Models rated at 7.2 kW and below at 240 volts (5.4 kW and below at 208 volts) require a separate 30-amp circuit.

See your model's "Installation Instructions" for all the installation requirements. 

Has a household circuit breaker tripped or fuse blown?

Check to ensure a household fuse has not blown or a circuit breaker has tripped. Reset the circuit breaker or replace the fuse if necessary. If the problem continues, contact a licensed electrician.

If not resolved, please note the following:

• Do not continue to attempt to operate the wall oven.
• Disconnect the power cord and/or turn off a circuit breaker that controls the appliance.

Reset power to the product:

• Power unit down by turning off the circuit breaker(s) for one (1) minute.
• Power unit up by turning on the circuit breaker(s).
• Monitor the oven for one (1) minute to ensure the error code does not display again.
• Verify oven operation. 

​

​  ​

​