Skip to main content

Self Clean Not Working - Wall Oven


Possible Solutions

Is the Control Lock On?

To unlock:

  • Press and hold START (on single oven) or the lower START (on double ovens) for 3 seconds to unlock 

  • No keypads will function with the controls locked.

Refer to your Owner's Manual for more information on setting Self-Clean or Control Lock.

Did you set the oven controls for a Self-Clean cycle?

  • Close the oven doors, then press CLEAN MODES.

  • For double ovens only:  Press the "1" or "2" number keypad to select the desired oven to clean.

  • Press the number "1" keypad for Precise Clean.

  • Press START.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

Has a household circuit breaker tripped or fuse blown?

Check to make sure a household fuse has not blown or that a circuit breaker has tripped. Reset the circuit breaker or replace the fuse if necessary. If the problem continues, contact a licensed electrician.

If not resolved, please note the following:

  • Do not continue to attempt to operate the wall oven.

  • Disconnect power cord and/or turn off circuit breaker that controls the appliance.

PRE ID Door Latch Assembly

  • Was this article helpful?