SELF DIAGNOSIS displays and then shuts off
- Every time the coffee system is switched on by the main power button (A in the first illustration below), it will display "SELF DIAGNOSIS", perform an automatic self diagnostic test, and preheat and rinse cycle that cannot be interrupted.
Use this switch only for vacation, storage, or cleaning. Also, be sure to unplug the unit before vacation or storage.
Please see your Use & Care Guide for additional information on cleaning your coffee system and preparing your coffee system for vacation and/or storage.
- With the main power button on, to turn the coffee system on, press the "On/Standby" button once (F in the illustration below) to the left of the coffee spout.
“HEATING UP Please wait...” will be displayed. There may be some water runoff through the coffee spout.
- To place the coffee system in standby mode (display off), press the "On/Standby" button (F in the illustration above). “TURNING OFF Please wait...” will display, and hot water will run off from the coffee spout.
- The coffee system will automatically go into standby mode after 30 minutes. To change this duration, see “Auto-Off” in the “Settings” section of the Use and Care Manual.
NOTE: The coffee system you have purchased may have some or all of the items pictured above. The locations and appearances of the features shown here may not match those of your model.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
Still need help?
In the event you need service, please call 1-800-JENN-AIR (536-6247) to arrange for an authorized servicer to perform repairs.