Reset power to the product:
The water in the reservoir is not high enough or did not boil at the correct rate.
There may be a problem with the Pressure Switch, the Boiler, the Solenoid Valve, the Conductivity Sensor, or the associated wiring.
- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Monitor the oven for one (1) minute to ensure the error code does not display again.
- Verify oven operation.
Still need help?
In the event you need service, please call 1-800-JENN-AIR (536-6247) to arrange for an authorized servicer to perform repairs.