Skip to main content



Possible Solutions

Was the clean cycle interrupted or stopped?

  • The  Clean button will continue to blink, during the Clean Cycle, indicating that the cleaning cycle is in  process. If the cycle is interrupted the Clean Light will continue to blink, press the "Clean" button to resume the cycle.  The display on the ice maker will change to "Cleaning Complete" when the cycle has finished. 
  • When the “Cleaning Complete” light is illuminated (approximately 70 - 90 minutes), the cleaning cycle is complete. 

Ice Maker - Clean Light.png

Restart the Ice Maker

If the above troubleshooting has not been successful try restarting the Ice Maker, by either unplugging the ice maker or turning off power to the ice maker at the fuse or circuit breaker. This will reset the controls on the ice maker. If the Cleaning indicator remains on after restarting the Ice Maker, press the "Clean" button so the cycle can complete. 


Still need help?

In the event you need service, please call 1-800-JENN-AIR (536-6247) to arrange for an authorized servicer to perform repairs.


  • Was this article helpful?