Skip to main content
Jenn-Air

Not Sure

Possible Solutions

Is the correct type of drain being used?

  • Gravity Drain Systems

Gravity drain systems are used when a near by floor drain is available and must not have low points where water can settle. The floor drains must be large enough to accommodate drainage from all drains.

  • Drain Pump Systems

A drain pump is designed to pump water to a maximum height of 10 ft (3 m) and is necessary when a floor drain is not available. Use only Whirlpool approved drain pump kit part number 1901A. Some models come with the drain pump already equipped, if your ice maker didn't come with a drain pump, and it is needed, it can be purchased as an accessory.

This accessory is available for purchase. Locate the accessories page in the menu above.

For complete installation instructions for both drain types see your installation guide. If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

Was the correct drain hose installed?

Verify the correct drain hose has been installed on the Ice Maker. A 10 ft. corrugated drain hose, must be used when installing the optional drain pump accessory kit.  If the correct drain hose is not used it could cause the ice maker to not drain properly, which may cause the ice maker to turn off. 

This accessory is available for purchase. Locate the accessories page in the menu above.

 

 

Still need help?

In the event you need service, please call 1-800-JENN-AIR (536-6247) to arrange for an authorized servicer to perform repairs.

 

  • Was this article helpful?