A common reason an ice maker does not make ice is that it was accidentally turned off. Sometimes, resetting the ice maker can resolve minor issues. Locate the reset button on your ice maker (consult your manual if unsure) and press and hold it for a few seconds. If your refrigerator doesn't have a reset button, perform a power cycle by unplugging it for one minute and plugging it back in. Refer to How to Turn the Ice Maker On for more information on using the ice maker.
If the Ice Maker is not connected to a water supply line but remains turned on, it could cause the following: a buzzing noise, the refrigerator may be too cold, food in the crisper drawers may freeze, and the freezer section may get too cold.
Does the water filter need to be replaced?
It is recommended that the JennAir water filter be replaced every 6 months, when the indicator light comes on, or as needed. Replacing your water filter regularly helps to ensure a continual supply of cleaner, fresh-tasting drinking water. Depending on your usage and water quality, it may need to be changed more frequently. A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser, potentially causing low ice production and a slowed water flow. JennAir recommends using everydrop® water filters. Find the right replacement filter for your refrigerator, and make the simple switch for clean water year-round.
Flushing the system is needed every time the filter is changed or when it is first installed. Flushing your refrigerator water filter is a key step that reduces excess air, prepares the filter for use, and removes excess carbon. Air in the water system may cause dripping at the dispenser, small or hollow ice cubes, or a cloudy appearance in the water quality. The amount of water needed to flush the water filter varies depending on the specific filter. Some filters require 1, 2, or 4 gallons to be dispensed for a proper flush; refer to the water filter's instructions for specific guidelines.
No dispenser? If your refrigerator doesn't have an internal or external water dispenser, after connecting to a water source or replacing the water filter, fill and discard three full ice containers to prepare the water filter for use. This will remove some of the loose carbon.