Leveling the Wine Cellar

After moving the wine cellar to its final location:

1. Remove the bottom grille.
2. Use an 11/16" (17 mm) socket driver to turn the leveling bolts clockwise or counterclockwise to adjust the legs to the floor as shown. The rollers should be off the floor.
   
3. Adjust the leveling legs to level and align the wine cellar from left to right and front to back so that the wine cellar is level and aligned with the cabinets.
4. Continue adjusting the leveling legs until the top of the wine cellar is making contact with the bottom of the solid soffit, or the bottom of the anti-tip boards, if anti-tip boards were used.
5. Re-install the bottom grille.

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the door alignment or top grille fit.

​

​ ​

​